Endpoint

Works with Bricscad (Windows) Classic and Pro, Bricscad (Linux) Classic

Toggles endpoint entity snap; snaps to the ends of open entities, such as line, arcs, and open polylines.

Accessing the Command

command bar: endpoint

transparent: endpoint

: endpoint

Displays no prompts in the command bar.

When endpoint entity snap is on, the cursor snaps to the endpoints of open entities, such as lines and arcs.

This entity snap works with 3D solid models.

Command Options

Option

Description

Endpoint

Entering the command toggles Endpoint entity snap. It snaps to the ends of open entities.

This command can be entered transparently during commands, but must be entered without the apostrophe prefix ( ' ).

Related Commands

OSnap - toggles entity snap modes in the Settings dialog box.

-OSnap - toggles entity snap modes in the command bar.

Aperture - sizes the aperture cursor for entity snaps.

2dIntersection - toggles apparent intersection snap mode.

3dIntersection - toggles intersection snap mode.

Apparent - toggles apparent intersection snap mode.

Center - toggles center snap mode.

Extension - toggles extension snap mode.

Insertion - toggles insertion snap mode.

Intersection - toggles intersection snap mode.

Midpoint - toggles midpoint snap mode.

Nearest - toggles nearest snap mode.

Node - toggles node (point) snap mode.

None - turns off all entity snap modes.

Perpendicular - toggles perpendicular snap mode.

Quadrant - toggles quadrant snap mode.

Quick - toggles quick snap mode.

Tangent - toggles tangent snap mode.