DmDistance3d

Works with Bricscad (Windows) Pro and Platinum, Bricscad (Linux) Pro and Platinum

Applies a distance constraint between two subentities of a solid or of different solids.

Accessing the Command

command bar:  dmdistance3d

menu bar:  Parametric | 3D Constraints | Distance

toolbar:  3D Constraints |

: dmDistance3d

Select a pair of subentities: (Select the first edge, face or surface.)

Entities/subentities in set: 1

Select a pair of subentities: (Select the first edge, face or surface.)

Press the TAB key to select obscured geometry.

Distances are measured as follows:

- perpendicular to faces and straight edges (edges and faces must be parallel).

- to the center point of cylindrical (circular or elliptical) surfaces.

Command Options

No options.

Related Commands

DmConstraint3D - applies geometric relationships and dimensional constraints between subentities (faces, surfaces, edges, ...) of 3D entities.

DmConstraintsBar - displays the 3D Constraints bar.

DmUpdate - Forces 3d constraints to update.

DmCoincident3d - applies a coincident constraint between two edges, two faces or an edge and a face of two different solids.

DmConcentric3d - applies a concentric constraint between two cylindrical, spherical or conical surfaces.

DmFix3d - Applies a fixed constraint to a solid or to an edge or a face of a solid.

DmParallel3d - applies a parallel constraint between two faces of a solid or of different solids.

DmPerpendicular3d - applies a perpendicular constraint between two faces of a solid or of different solids.

DmRigidSet3d - Allows to define a set of entities or subentities as a rigid body.

DmTangent3d - applies a tangent constraint between a face and a curved surface of different solids.

DmAngle3d - applies an angle constraint between two faces of a solid or of different solids.

DmRadius3d - applies a radius constraint to cylindrical surfaces or circular edges.