SmDelete

Platinum Platinum Platinum

Removes a bend or a junction by restoring a hard edge between two flanges; removes a flange with all the bends adjacent to it. The adjacent flanges are extended up to a junction configuration with the flange being deleted.

Accessing the Command

command bar:  smdelete

menu bar:  Sheet Metal | Delete Feature

toolbar:  Sheet Metal |

Quad:  Sheet Metal |

: smdelete

Prompts you in the command bar:

Select feature faces or thickness faces:  (Select an item.)

Entities in set: 1

Select feature faces or thickness faces: (Select another item or right click.)

Command Options

 No options.

Related Commands

SmBendCreate - converts hard edges (sharp edges between flange faces) into bends.

SmConvert - automatically recognizes flanges and bends in a 3D solid.

SmDissolve - removes sheet metal data from the selected faces.

SmFlangeConnect - closes gaps between two arbitrarily oriented flanges.

SmFlangeEdge - creates one or more flanges to a sheet metal part by pulling one or more edges of an existing flange.

SmFlangeSplit - splits a flange along a line drawn on its face.

SmJunctionCreate - converts hard edges (sharp edges between flange faces) and bends into junctions.

SmReliefCreate - makes proper corner and bend reliefs. Corner reliefs are built on corners which have three or more adjacent flanges. Bend reliefs are built on the start and end of a flange edge .