Toggles the entity snap modes for 3D entities at the command line (short for "3D object snap").
Accessing the Command
command bar: -3dosnap
: -3dosnap
Prompts you in the command bar:
3d Snaps: ZNEArest/ZVERtex/ZMIDpoint/ZCENter/ZPERpendicular/ZKNOt/ZINTersection/ON/<OFF>: (Type ON or OFF to toggle the 3d entity snap modes or type one or more options.)
If you want to set more then one snap mode, separate the names with commas.
Command Options
|
Option |
Description |
|
Snaps to a point on the face of a 3D entity that is nearest to the cursor. |
|
|
Snaps to the closest vertex of a 3d entity. |
|
|
Snaps to the midpoint of a face edge. |
|
|
Snaps to the center of 3d face. |
|
|
Snaps to a point perpendicular to a face. |
|
|
Snaps to a knot on a spline. |
|
|
Snaps to the intersection of linear entities, edges and polar or entity snap tracking lines with faces. |
|
|
Enables the currently selected 3d snap modes. |
|
|
Disables the currently selected 3d snap modes. |
Related Commands
3dOsnap - sets the entity snap modes for 3D entities through the Settings dialog box.
OSnap - sets entity snaps through the Settings dialog box.
-OSnap - toggles entity snap modes at the command line .
Aperture - sizes the aperture cursor for entity snaps.
Zcenter - toggles the 3D center entity snap. Snaps to the center of planar or curved 3d faces.
Zintersection - Toggles the 3D intersectionpoint snap. Snaps to the intersection of linear entities, edges and polar or entity snap tracking lines with faces.
Zknot - toggles the 3D knot entity snap. Snaps to a knot on a spline.
Zmidpoint - toggles the 3D midpoint snap. Snaps to the midpoint of a face edge.
Znearest - toggles the 3D nearest entity snap. Snaps to a point on the face of a 3D entity that is nearest to the cursor.
Znone - disables all 3d snap modes.
Zperpendicular - toggles the 3D perpendicular entity snap. Snaps to a point perpendicular to a face.
Zvertex - toggles the 3D vertex entity snap. Snaps to the closest vertex of a 3d entity.
| © Menhirs NV. All rights reserved. |