Bounded
|
The BoundedPlane type exposes the following members.
Methods
| Name | Description | |
|---|---|---|
|
Clone | Clones this entity and returns a handle to the cloned
entity. (Inherited from Entity3d) |
|
|
ClosestPointTo(Point3d) | Gets a point on this surface that is the closest to the
specified point. (Inherited from Surface) |
|
|
ClosestPointTo(Point3d, Tolerance) | Gets a point on this surface that is the closest to the
specified point according to a tolerance. (Inherited from Surface) |
|
|
ClosestPointToLinearEntity(LinearEntity3d) | Calculates the point on this planar entity that is closest to
the specified line and the point on the specified line that is
closest to this planar entity. (Inherited from PlanarEntity) |
|
|
ClosestPointToLinearEntity(LinearEntity3d, Tolerance) | Calculates the point on this planar entity that is closest to
the specified line and the point on the specified line that is
closest to this planar entity. (Inherited from PlanarEntity) |
|
|
ClosestPointToPlanarEntity(PlanarEntity) | Calculates the point on this planar entity that is closest to
the specified planar entity and the point on the specified planar
entity that is closest to this planar entity. (Inherited from PlanarEntity) |
|
|
ClosestPointToPlanarEntity(PlanarEntity, Tolerance) | Calculates the point on this planar entity that is closest to
the specified planar entity and the point on the specified planar
entity that is closest to this planar entity. (Inherited from PlanarEntity) |
|
Create | Creates a BoundedPlane object based on the passed pointer. |
|
|
CreateObjRef | Creates an object that contains all the relevant information
required to generate a proxy used to communicate with a remote
object. (Inherited from MarshalByRefObject) |
|
|
Dispose | (Inherited from DisposableWrapper) |
|
|
DistanceTo(Point3d) | Retrieves the distance from the closest point on this plane to
the specified point. (Inherited from Surface) |
|
|
DistanceTo(Point3d, Tolerance) | Retrieves the distance from the closest point on this plane to
the specified point according to a tolerance. (Inherited from Surface) |
|
|
Equals | (Inherited from PlanarEntity) |
|
|
EvaluatePoint | Retrieves the 3D point on this surface that corresponds to the
specified point parameter value. (Inherited from Surface) |
|
|
GetClosestPointTo(Point3d) | Gets a point on this surface that is the closest to the
specified point. (Inherited from Surface) |
|
|
GetClosestPointTo(Point3d, Tolerance) | Gets a point on this surface that is the closest to the
specified point according to a tolerance. (Inherited from Surface) |
|
|
GetCoordinateSystem | Returns the orthonormal canonical coordinate system of this
plane. (Inherited from PlanarEntity) |
|
|
GetEnvelope | (Inherited from Surface) |
|
|
GetHashCode | (Inherited from DisposableWrapper) |
|
|
GetLifetimeService | Retrieves the current lifetime service object that controls the
lifetime policy for this instance. (Inherited from MarshalByRefObject) |
|
|
GetType | Gets the Type of the current
instance. (Inherited from Object) |
|
|
InitializeLifetimeService | Obtains a lifetime service object to control the lifetime
policy for this instance. (Inherited from MarshalByRefObject) |
|
|
IntersectWith(BoundedPlane) | Creates an intersection line between this and the passed bounded plane. |
|
|
IntersectWith(LinearEntity3d) | Calculates an intersection point with the specified line. (Inherited from PlanarEntity) |
|
|
IntersectWith(Plane) | Creates an intersection line between this and the passed bounded plane. |
|
|
IntersectWith(BoundedPlane, Tolerance) | Creates an intersection line between this and the passed bounded plane with the specified tolerance. |
|
|
IntersectWith(LinearEntity3d, Tolerance) | Calculates an intersection point with the specified line. (Inherited from PlanarEntity) |
|
|
IntersectWith(Plane, Tolerance) | Creates an intersection line between this and the passed plane with the specified tolerance. |
|
|
IsClosedInU | (Inherited from Surface) |
|
|
IsClosedInU(Tolerance) | (Inherited from Surface) |
|
|
IsClosedInV | (Inherited from Surface) |
|
|
IsClosedInV(Tolerance) | (Inherited from Surface) |
|
|
IsCoplanarTo(PlanarEntity) | Checks whether the specified planar entity is coplanar to this
entity. (Inherited from PlanarEntity) |
|
|
IsCoplanarTo(PlanarEntity, Tolerance) | Checks whether the specified planar entity is coplanar to this
entity. (Inherited from PlanarEntity) |
|
|
IsEqualTo(Entity3d) | Checks whether this entity is equal to the specified
entity. (Inherited from Entity3d) |
|
|
IsEqualTo(Entity3d, Tolerance) | Checks whether this entity is equal to the specified entity
within a geometric tolerance. (Inherited from Entity3d) |
|
|
IsOn(Point3d) | Checks whether the specified point is on this entity. (Inherited from Entity3d) |
|
|
IsOn(Point3d, Tolerance) | Checks whether the specified point is on this entity according
to a geometric tolerance. (Inherited from Entity3d) |
|
|
IsOn(Point3d, Point2d) | (Inherited from Surface) |
|
|
IsOn(Point3d, Point2d, Tolerance) | (Inherited from Surface) |
|
|
IsParallelTo(LinearEntity3d) | Checks whether the specified linear entity is parallel to this
entity. (Inherited from PlanarEntity) |
|
|
IsParallelTo(PlanarEntity) | Checks whether the specified planar entity is parallel to this
entity. (Inherited from PlanarEntity) |
|
|
IsParallelTo(LinearEntity3d, Tolerance) | Checks whether the specified linear entity is parallel to this
entity. (Inherited from PlanarEntity) |
|
|
IsParallelTo(PlanarEntity, Tolerance) | Checks whether the specified planar entity is parallel to this
entity. (Inherited from PlanarEntity) |
|
|
IsPerpendicularTo(LinearEntity3d) | Checks whether the specified linear entity is perpendicular to
this entity. (Inherited from PlanarEntity) |
|
|
IsPerpendicularTo(PlanarEntity) | Checks whether the specified planar entity is perpendicular to
this entity. (Inherited from PlanarEntity) |
|
|
IsPerpendicularTo(LinearEntity3d, Tolerance) | Checks whether the specified linear entity is perpendicular to
this entity. (Inherited from PlanarEntity) |
|
|
IsPerpendicularTo(PlanarEntity, Tolerance) | Checks whether the specified planar entity is perpendicular to
this entity. (Inherited from PlanarEntity) |
|
|
Mirror | Mirrors this entity about the specified plane. (Inherited from Entity3d) |
|
|
ParameterOf(Point3d) | Retrieves a 2D point (U, V) that represents parametric values
for the passed 3D point on this surface. (Inherited from Surface) |
|
|
ParameterOf(Point3d, Tolerance) | Retrieves a 2D point (U, V) that represents parametric values
for the passed 3D point on this surface. (Inherited from Surface) |
|
|
RotateBy | Rotates this entity by the specified angle about the axis
defined by the point and the vector. (Inherited from Entity3d) |
|
|
ScaleBy | Scales this entity by the scale factor about the specified
point. (Inherited from Entity3d) |
|
|
Set(Point3d, Point3d, Point3d) | Sets the origin and U and V points that define the plane. |
|
|
Set(Point3d, Vector3d, Vector3d) | Sets the origin and U and V vectors that define the plane. |
|
|
ToString | Returns a string that represents the current object. (Inherited from Object) |
|
|
TransformBy | Applies the specified 2D transformation matrix to this
entity. (Inherited from Entity3d) |
|
|
TranslateBy | Translates this entity by applying a 3D translation vector. (Inherited from Entity3d) |
See Also