Toggles Nearest entity snap mode; snaps to the nearest geometry on entities.
Accessing the Command
command bar: nearest
transparent: nearest
toolbar: Entity snaps | 
: nearest
Displays no prompts in the command bar.
When nearest entity snap is on, the cursor snaps to the nearest geometry.
This entity snap works with 3D solid models.
Command Options
|
Option |
Description |
|
Nearest |
Entering the command toggles Nearest entity snap. It snaps to the nearest geometry on entities. This command can be entered transparently during commands, but must be entered without the apostrophe prefix ( ' ). |
Related Commands
OSnap - toggles entity snap modes in the Settings dialog box.
-OSnap - toggles entity snap modes in the command bar.
Aperture - sizes the aperture cursor for entity snaps.
2dIntersection - toggles apparent intersection snap mode.
3dIntersection - toggles intersection snap mode.
Apparent - toggles apparent intersection snap mode.
Center - toggles center snap mode.
Endpoint - toggles endpoint snap mode.
Extension - toggles extension snap mode.
From - allows to enter relative coordinates with respect to a reference point.
Insertion - toggles insertion snap mode.
Intersection - toggles intersection snap mode.
Midpoint - toggles midpoint snap mode.
Mtp - allows to specify a point as the midpoint between two points.
Node - toggles node (point) snap mode.
None - turns off all entity snap modes.
Parallel - toggles parallel snap mode.
Perpendicular - toggles perpendicular snap mode.
Quadrant - toggles quadrant snap mode.
Quick - toggles quick snap mode.
Tangent - toggles tangent snap mode.
| © Menhirs NV. All rights reserved. |