SmJunctionCreate

Sheet Metal Sheet Metal Sheet Metal

Converts hard edges (sharp edges between flange faces) and bends into junctions.

Accessing the Command

command bar:  smjunctioncreate

menu bar:  Sheet Metal | Create Junction

toolbar:  Sheet Metal |

ribbon:  Sheet Metal | Modify |

: smjunctioncreate

Prompts you in the command bar:

Select flange faces or hard edges: (Select a flange or a hard edge.)

Entities in set: 1

Select flange faces or hard edges: (Select another item or right click.)

Command Options

No options.

Procedures

Converting hard edges to junctions

Converting hard edges to bends

Related Commands

SmBendCreate - converts hard edges (sharp edges between flange faces) into bends.

SmConvert - automatically recognizes flanges and bends in a 3D solid.

SmDelete - removes a bend or a junction by restoring a hard edge between two flanges; removes a flange with all the bends adjacent to it. The adjacent flanges are extended up to a junction configuration with the flange being deleted.

SmDissolve - removes sheet metal data from the selected faces.

SmFlangeConnect - closes gaps between two arbitrarily oriented flanges.

SmImprint - splits thickness faces of a sheet metal part by imprinted edges, according to adjacent flanges and bends.

SmJunctionSwitch - allows changing a symmetrical junction feature to one with overlapping faces.

SmReliefCreate - makes proper corner and bend reliefs. Corner reliefs are built on corners which have three or more adjacent flanges. Bend reliefs are built on the start and end of a flange edge .